R&S CMW-KG8 Series, User Manual

Page: 547 / 964

CDMA2000 Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
547 User Manual 1173.9511.02 ─ 11
Fig. 4-41: Service configuration overview
For parameter descriptions refer to the subsections.
● Miscellaneous Service Configuration ...................................................................547
● Loopback Service ..................................................................................................549
● Speech Service .....................................................................................................549
● Test Data Service ..................................................................................................551
● Packet Data Service ..............................................................................................552
4.3.8.1 Miscellaneous Service Configuration
This section defines the calls from the MS that the R&S CMW will accept.
Fig. 4-42: Miscellaneous service configuration settings
Accept Speech Calls ................................................................................................... 547
Accept Packet Calls .................................................................................................... 548
Accept Speech Calls
Selects the types of Mobile Originated Calls (MOC) that the R&S CMW will accept and
specifies how it will respond to an accepted or rejected MOC. The Accept No Calls –
Intercept / Reorder / Busy… settings can be used to perform MOC tests according to
the signaling conformance test specification C.S0031-0.
Mobile terminated calls (MTC) are possible while one of the Do not accept any
MOCs… options is selected.
●
Accept All Calls
Accept all MOCs, irrespective of the configured service option at the R&S CMW.
●
Accept Only Selected Primary Service
Accept only MOCs requesting the service option currently selected at the
R&S
CMW.
●
Force to Selected Primary Service
R&S CMW tries to negotiate MOC to the service option which is selected at the
R&S CMW. If service negotiation is not successful, the MOC fails.
●
Accept No Calls – Intercept…
Do not accept any MOCs but communicate an intercept condition when the MS
attempts a call. The intercept condition can be communicated via an
AWIM (Alert
GUI Reference
深圳德标仪器
135-1095-0799