NEC V850E/Dx3, Preliminary User'S Manual

Page: 354 / 930

354
Chapter 11 16-bit Timer/Event Counter P (TMP)
Preliminary User’s Manual U17566EE1V2UM00
(b) Function as capture register
When the TPnCCR0 register is used as a capture register in the free-
running timer mode, the count value of the 16-bit counter is stored in the
TPnCCR0 register if the valid edge of the capture trigger input pin (TIPn0
pin) is detected. In the pulse-width measurement mode, the count value of
the 16-bit counter is stored in the TPnCCR0 register and the 16-bit counter
is cleared (0000H) if the valid edge of the capture trigger input pin (TIPn0)
is detected.
Even if the capture operation and reading the TPnCCR0 register conflict,
the correct value of the TPnCCR0 register can be read.
The following table shows the functions of the capture/compare register in
each mode, and how to write data to the compare register.
Table 11-9 Function of capture/compare register in each mode and how to write
compare register
Operation mode Capture/compare register How to write compare register
Interval timer Compare register Anytime write
External event counter Compare register Anytime write
External trigger pulse output Compare register Batch write
One-shot pulse output Compare register Anytime write
PWM output Compare register Batch write
Free-running timer Capture/compare register Anytime write
Pulse width measurement Capture register -
Downloaded from Elcodis.com electronic components distributor