Mitsubishi Melsec-Q QD75D1, User Manual

Page: 758 / 858

Appendix - 72
MELSEC-Q
APPENDICES
Appendix 10.1 Adding a module
Add the model name of the positioning module to be used in the project.
(1) Operating procedure
1. Open the "New Module..." dialog box.
Project window Right-click [Intelligent Function Module] "New Module..."
2. Configure settings
Set the following items.
Item Contents
Module Type Select "QD75 Type Positioning Module".
Module Selection
Module Name
Select the model name of the module to be
connected.
Mounted Slot No.
Select the number of the slot where the module is
mounted.
Mount Position
Specify start X/Y
address
The start I/O number (hexadecimal) of the module
to be mounted on the slot set in "Mounted Slot No."
is displayed. The value can be changed.
Title Setting Title Enter a title.