Mitsubishi Melsec-Q QD75D1, User Manual

Page: 55 / 858

2 - 7
MELSEC-Q
2 SYSTEM CONFIGURATION
Applicable CPU module
Base unit
*2
CPU type CPU model
No. of modules
*1
Main base unit Extension base unit
Q13UDEHCPU
Q20UDEHCPU
Q26UDEHCPU
Q50UDEHCPU
Universal model
QCPU
Q100UDEHCPU
Up to 64
Programmable
controller CPU
Safety CPU QS001CPU N/A
Q06CCPU-V-H01
Q06CCPU-V
Q06CCPU-V-B
C Controller module
*3
Q12DCCPU-V
Up to 64
: Applicable, : N/A
1: Limited within the range of I/O points for the CPU module.
2: Can be installed to any I/O slot of a base unit.
3: Use the QD75 of function version B or later.
(b) Mounting to a MELSECNET/H remote I/O station
The table below shows the network modules and base units applicable to
the QD75 and quantities for each network module model.
Depending on the combination with other modules or the number of
mounted modules, power supply capacity may be insufficient.
Pay attention to the power supply capacity before mounting modules, and if
the power supply capacity is insufficient, change the combination of the
modules.
Base unit
*2
Applicable network
module
No. of modules
*1
Main base unit of
remote I/O station Extension base unit of
remote I/O station
QJ72LP25-25
QJ72LP25G
QJ72LP25GE
QJ72BR15
Up to 64
: Applicable, : N/A
1: Limited within the range of I/O points for the CPU module.
2: Can be installed to any I/O slot of a base unit.
REMARK
The basic model QCPU and C controller cannot configure MELSECNET/H remote
I/O network.
(2) Compatibility with multiple CPU system
When using the QD75 in a multiple CPU system, refer to the QCPU User's Manual
(Multiple CPU System).