Mitsubishi Melsec-Q QD75D1, User Manual

Page: 690 / 858

Appendix - 4
MELSEC-Q
APPENDICES
(2) Precaution on the use of sequence programs
The QD75P N/QD75D N is upgraded from the QD75P /QD75D . Therefore,
the recognized sequence programs for the QD75P /QD75D can be applied to
the QD75P N/QD75D N. Note that specifications such as time takes for start-
up and data update cycle are improved. When applying a sequence program to
the QD75P N/QD75D N, modify the sequence program if necessary, checking
the processing timing.
(3) Transferring the set data of the QD75P /QD75D using GX
Works2
When GX Works2 is used, the set data of the QD75P /QD75D can be
transferred to the QD75P N/QD75D N in the following procedure.
(a) Saving the set data of the QD75P /QD75D from "Save the Positioning
Module Data…"
1) In the project view, select the QD75P /QD75D from where the set
data is transferred.
2) Go to [Project] → [Intelligent Function Module]
→ [Save the Positioning Module Data…].
3) Input the file name, and save the set data.
(b) Reading the set data to the QD75P N/QD75D N from "Read from the
Positioning Module Data…"
1) In the project view, select the QD75P N/QD75D N to where the
saved data is transferred.
2) Go to [Project] → [Intelligent Function Module]
→ [Read from the Positioning Module Data…].
3) Select the name of the file saved in step (a), and open it. The following
window opens.
4) Check the data to read and click . The set data is read to the
QD75P N/QD75D N.