Mitsubishi Melsec-Q QD75D1, User Manual

Page: 455 / 858

10 - 19
MELSEC-Q
10 HIGH-LEVEL POSITIONING CONTROL
Judgment whether the condition operator is "=" or "=” at the wait start.
Judgment on data is carried out for each control cycle of the QD75. Thus, in the
judgment on the data such as current feed value which varies continuously, the
operator "=" may not be detected. If this occurs, use a range operator.
REMARK
The "PLC CPU memory area" can be designated as the buffer memory address to
be designated in
Da.17
. (Refer to Section 7.1.1 "Configuration and roles of QD75
memory".)
Address 30000
30001
30099
QD75 buffer memory