background image

FieldPoint ™ is a trademark of National Instruments Corporation. Product and company names are 
trademarks or trade names of their respective companies.

321697A-01

©

 Copyright 1997 National Instruments Corp. All rights reserved.

July 1997

FP-1000

FieldPoint RS-232 Network Module

Highlights

RS-232 interface to host computer

Built-in isolated RS-485 repeater to connect to FP-1001 
network modules

Compatible with industry standard Optomux protocol

Runs on 11 to 30 VDC power

Built-in high efficiency power supply powers I/O modules

-40° to +70° C operation

Overview

The FP-1000 is a network module for the FieldPoint system. It 
provides connection to an RS-232 network using a simple ASCII 
protocol. In addition, it has an isolated RS-485 repeater built in to 
transparently add up to 24 FP-1001 network modules to the same 
host computer serial port.

This document provides a quick guide to installing and configuring 
the FP-1000 network module. For more detailed information on 
using the network module, refer to the FP-1000/1001 user manual. 
For information on the ASCII protocol used by the network 
module, refer to the FP-1000/1001 programmer reference manual.

FP1000.fm  Page 1  Thursday, July 31, 1997  8:49 AM

Summary of Contents for FieldPoint FP-1000













Reviews: