:WGEN<w> Commands
33
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
1223
Query Syntax
:WGEN<w>:FUNCtion?
The :WGEN<w>:FUNCtion? query returns the currently selected signal type.
Return Format
<signal><NL>
<signal> ::= {SIN | SQU | RAMP | PULS | DC | NOIS | SINC | EXPR | EXPF
| CARD | GAUS | ARB}
See Also
•
"Introduction to :WGEN<w> Commands"
•
GAUSsian
Use these commands to set the gaussian pulse
signal parameters:
•
•
•
•
100 mHz to
5 MHz
20 mVpp to
7.5 Vpp
±2.50 V
ARBitrary
Use these commands to set the arbitrary signal
parameters:
•
•
•
•
•
•
100 mHz to
12 MHz
20 mVpp to
10 Vpp
±5.00 V
1
When the output load is 50
Ω
, these values are halved.
2
The minimum amplitude is limited to 40 mVpp if the offset is greater than 500 mV or less than -500 mV. Likewise, the offset
is limited to +/-500 mV if the amplitude is less than 40 mVpp.
Waveform
Type
Characteristics
Frequency
Range
Max.
Amplitude
2
(High-Z)
1
Offset
2
(High-Z)
1
