1174
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
32
:WAVeform Commands
If there is a hole in the data, the hole is represented by a value of 0. The
BYTE-formatted data transfers over the programming interface faster than
ASCii or WORD-formatted data, because in ASCii format, as many as 13 bytes
per point are transferred, in BYTE format one byte per point is transferred, and
in WORD format two bytes per point are transferred.
The :WAVeform:BYTeorder command (see
) has no effect when the
data format is BYTE.
Reporting the Setup
The following is a sample response from the :WAVeform? query. In this case, the
query was issued following a *RST command.
:WAV:UNS 1;VIEW MAIN;BYT MSBF;FORM BYTE;POIN +1000;SOUR CHAN1;SOUR:SUBS
NONE