What's New
1
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
39
Changed
Commands
Command
Differences
:RECall:WMEMory<r>:[STARt]
(see
)
There is now a <data> option for recalling waveform data from the
controller PC.
:SBUS<n>:A429:SPEed (see
)
The USER option is now available to select a user-defined baud
rate.
:SBUS<n>:MANChester:BAUDr
ate (see
)
The minimum baud rate is changed from "2000" to "500".
:SBUS<n>:MODE (see
)
The USBPd mode is now available with the USB PD serial decode
and triggering license.
:SBUS<n>:SENT:PPULse (see
)
The pause mode now, in addition to supporting pause pulses off
and on, supports SENT SPC (Short PWM Code) where message
events are triggered by the master.
:TIMebase:MODE (see
The XY and ROLL modes are now available.