Keysight Technologies InfiniiVision M9241A, Scpi Programmer'S Manual

Page: 305 / 1516

305
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes
SCPI Programmer's Guide
11 :COUNter Commands
These commands control the counter feature. See "Introduction to :COUNter
Commands" on page 306.
Table 86 :COUNter Commands Summary
Command Query Options and Query Returns
n/a :COUNter:CURRent?
(see
page 307
)
<value> ::= current counter value
in NR3 format
:COUNter:ENABle {{0 |
OFF} | {1 | ON}} (see
page 308
)
:COUNter:ENABle? (see
page 308
)
{0 | 1}
:COUNter:MODE <mode>
(see
page 309
)
:COUNter:MODE (see
page 309
)
<mode> ::= {FREQuency | PERiod |
TOTalize}
:COUNter:NDIGits
<value> (see
page 310
)
:COUNter:NDIGits (see
page 310
)
<value> ::= 3 to 8 in NR1 format
:COUNter:SOURce
<source> (see
page 311
)
:COUNter:SOURce? (see
page 311
)
<source> ::= {CHANnel<n> |
TQEVent}
<n> ::= 1 to (# analog channels)
in NR1 format
:COUNter:TOTalize:CLE
ar (see
page 312
)
n/a n/a
:COUNter:TOTalize:GAT
E:ENABle {{0 | OFF} |
{1 | ON}} (see
page 313
)
:COUNter:TOTalize:GAT
E:ENABle? (see
page 313
)
{0 | 1}
:COUNter:TOTalize:GAT
E:POLarity <polarity>
(see
page 314
)
:COUNter:TOTalize:GAT
E:POLarity? (see
page 314
)
<polarity> ::= {{NEGative |
FALLing} | {POSitive | RISing}}