Fuji Electric FRENIC-AQUA series, User Manual

Page: 631 / 751

6-350
K20
K21
K22
Bar Chart 1 (Display item selection)
Bar Chart 2 (Display item selection)
Bar Chart 3 (Display item selection)
These function codes specify the items to be displayed in bar graphs 1 to 3 on the LCD
monitor.
- Data setting range: 1 to 26
Data for
K20 to K22
Monitor item
Monitor name
LCD
indicator
Unit Meaning of displayed value
1 Output frequency 1
(before slip
compensation)
Output frequency
(synchronous)
Output f1 Hz Reference frequency (Hz)
13 Output current Output current Output I A
Current output from the inverter
in RMS
14 Output voltage Output voltage Output V V
Voltage output from the inverter
in RMS
18 Calculated torque Calculated torque Torque %
Motor output torque in %
(Calculated value)
19 Input power Input power
Consump-
tion W
kW Input power to the inverter
25 Load factor Load factor
Load
factor
%
Load factor of the motor in % as
the rated output being at 100%
26 Motor output Motor output M output kW Motor output in kW
The monitor items for bar charts 1 to 3 can be selected easily in Programming mode as
follows.
PRG > 1(Start-up) > 4(Disp Setting) > 7(Bar Gage 1)
PRG > 1(Start-up) > 4(Disp Setting) > 8(Bar Gage 2)
PRG > 1(Start-up) > 4(Disp Setting) > 9(Bar Gage 3)
For detailed setting procedure, refer to Chapter 5, Section 5.6.2.4 "Specifying the
running status item to be monitored."