Fuji Electric FRENIC-AQUA series, User Manual

Page: 241 / 751

5-62
5.6.4.3 Check Status of Input/Output Signal
PRG > 3(INV Info) > 3(I/O Check)
This allows confirmation of the inverter’s digital input/output signal and analog input/output signal.
This can be used when confirming operational status during maintenance or on test runs.
Table 5.15 "I/O Check" Display Items
Operational
Guide Page
No.
Category Category Details Code Details
1
Di
Control circuit
terminal input signal
(terminal input)
FWD, REV ，
X1-X7,
EN1, EN2
ON/OFF information on control circuit’s
terminal input
(Reversal on short-circuit, no reversal when
open)
2 Di: Link
Communications port
input signal
FWD, REV
，
X1-X7,
XF, XR, RST
Input information on communication-specific
function code S06
(Reversal on 1, no reversal on 0)
3 Do Output signal
Y1-Y4, Y5A ，
30ABC
Output signal information
12 Terminal 12 input voltage
C1 Terminal C1 input current
V2 Terminal V2 input voltage
FM1-Vo Terminal FM1 output voltage, output current
4 Ai/Ao Analog input signal
FM2-Vo Terminal FM2 output voltage, output current
Fref
0.00
Hz
STOP
Iout 0.00A
PWR 0.03kW
1. Press the key while the running mode
screen is displayed.
↓
PRG
0.Quick Setup
1.Start-up
2.Function Code
3.INV Info
4.Alarm Info
5.User Config
2. Use the / keys to select [3. INV Info],
and confirm with the key.
↓
/
PRG>3
1.Energy Monitor
2.Op Monitor
3.I/O. Check
4.Maintenance
5.Unit Info
3. Use the / keys to select [3. I/O Check],
and confirm with the key.
↓
/
Return to previous screen Return to running mode