Fuji Electric FRENIC-AQUA series, User Manual

Page: 420 / 751

6.3 Details of Function Codes
6-139
Chap. 6
FUNCTION C
ODES
C64 Analog Input Adjustment for Terminal [C1] (Display unit)
C64 specifies the display unit for analog input monitor, PID control commands and feedback
amounts on terminal [C1].
The specified display unit appears when analog input monitor, SV and PV are displayed on
the main or sub monitor.
Data for
C64
Display unit
Data for
C64
Display unit
Data for
C64
Display unit
1 No display unit 24 L/min (Flowrate) 46 Psi (Pressure)
2 % 25 L/h (Flowrate) 47 mWG (Pressure)
4 r/min 40 Pa (Pressure) 48 inWG (Pressure)
7 kW 41 kPa (Pressure) 60 K (Temperature)
20 m
3
/s (Flowrate) 42 MPa (Pressure) 61
°
C (Temperature)
21 m
3
/min (Flowrate) 43 mbar (Pressure) 62
°
F (Temperature)
22 m
3
/h (Flowrate) 44 bar (Pressure) 80 ppm (Density)
23 L/s (Flowrate) 45 mmHg (Pressure)
Setting up an analog input monitor for terminal [C1]
1) Input monitor
Set E62 (Terminal [C1] extended function) to "20."
2) Display section
Set any of K10 (Main monitor display), K16 (Sub monitor 1 display) and K17 (Sub
monitor 2 display) to "27" (Analog input monitor).
For details, refer to Chapter 5, Section 5.5.1 "Monitoring the running status."
3) Display unit
Select the desired display unit with C64.
4) Scale
- Maximum scale (C65): Set a physical quantity to be displayed when the analog input
value is 100%.
- Minimum scale (C66): Set a physical quantity to be displayed when the analog input
value is 0%.
C65, C66 Analog Input Adjustment for Terminal [C1] (Maximum scale, Minimum scale)
C65 and C66 specify the maximum and minimum scales to display easy-to-understand
physical quantity converted from analog input on terminal [C1].
- Data setting range: -999.00 to 0.00 to 9990.00 for maximum and minimum scales