Fuji Electric FRENIC-AQUA series, User Manual

Page: 296 / 751

6.2 Function Code Tables
6-15
Chap. 6
FUNCTION C
ODES
Code Name Data setting range
Change
when
running
Data
copying
Default
setting
H98 Protection/Maintenance Function
(Mode selection)
0 to 255
Bit 0: Lower the carrier frequency automatically
(0: Disabled; 1: Enabled)
Bit 1: Detect input phase loss (0: Disabled; 1: Enabled)
Bit 2: Detect output phase loss (0: Disabled; 1: Enabled)
Bit 3: Select life judgment threshold of DC link bus capacitor
(0: Factory default level; 1: User setup level)
Bit 4: Judge the life of DC link bus capacitor
(0: Disabled; 1: Enabled)
Bit 5: DC fan lock detection
(0: Disabled; 1: Enabled)
Bit 7: Switch IP21/IP55 enclosure (0: IP21; 1: IP55)
Y Y AQ1M
(IP21)
19
AQ1L
(IP55)
147
H104 Number-of-retry Clear Time 0.5 to 5.0 (min)
Y Y 5.0
H105 Retry Target Selection 0 to 255
Bit 0: OC1 to OC3
Bit 1: OV1 to OV3
Bit 2: OH1 OH3 OLU
Bit 3: -
Bit 4: OL1
Bit 5: OH4
Bit 6: -
Bit 7: - Y Y 225
H106 Retry Target Selection 2 0 to 255
Bit 0: OH2
Bit 1: LV
Bit 2: -
Bit 3: -
Bit 4: -
Bit 5: -
Bit 6: -
Bit 7: -
Y Y 0
H110 Input Phase Loss Protection Avoidance
Operation (Mode selection)
0: Disable
1: Enable (Decrease output frequency)
Y Y 0
H112 Voltage Shortage Avoidance Operation
(Mode selection)
0: Disable
1: Enable (Decrease output frequency)
Y Y 0
H114 Automatic Deceleration (Operation level) 0.0 to 50.0%
Auto
Y Y Auto
H116 Fire Mode (Mode selection) 0: FMS: ON
1: FMS toggle method
2: FMS latch method
N Y 0
H117 (Confirmation time) 0.5 to 10.0 s * Set ON/OFF setting time for FMS signals. Y Y 3.0
H118 (Reference frequency) Inherit: Follow the ordinary reference frequency specified with
F01, etc.
0.1 to 120.0 Hz
Y Y Inherit
H119 (Rotation direction) 0: Follow the run command specified with F02, etc.
2: Forward rotation
3: Reverse rotation
N Y 0
H120 (Start method) 0: Follows the start methods specified with instant power failure
restart
1: Auto search
Y Y 0
H121 (Reset interval) 0.5 to 20.0 s Y Y 5.0
H181 Light Alarm Selection 1 0 to 255
Bit 0: -
Bit 1: OH2
Bit 2: OH3
Bit 3: -
Bit 4: -
Bit 5: OL1
Bit 6: -
Bit 7: -
Y Y 0
H182 Light Alarm Selection 2 0 to 255
Bit 0: -
Bit 1: -
Bit 2: Er4
Bit 3: Er5
Bit 4: Er8
Bit 5: ErP
Bit 6: -
Bit 7: -
Y Y 0