Fuji Electric FRENIC-AQUA series, User Manual

Page: 239 / 751

5-60
Fref
0.00
Hz
STOP
Iout 0.00A
PWR 0.03kW
1. Press the key while the running mode
screen is displayed.
↓
PRG
0.Quick Setup
1.Start-up
2.Function Code
3.INV Info
4.Alarm Info
5.User Config
2. Use the / keys to select [3. INV Info],
and confirm with the key.
↓
/
PRG>3
1.Energy Monitor
2.Op. Monitor
3.I/O. Check
4.Maintenance
5.Unit Info
3. Use the / keys to select [2. Op Monitor],
and confirm with the key.
↓
/
PRG>3>2[1/6]
Fref 0.00Hz
Fout1 0.00Hz
Fout2 0.00Hz
Iout 0.00A
Vout 0.0V
Torque 0%
←
←
←
←
←
←
←
/
PRG>3>2[2/6]
SyncSp 0.00r/min
LoadSp 0.00r/min
←
←
/
PRG>3>2[3/6]
Status
FWD Const
ILimit
M1 IM
VLimit
VF TrqLimit
---
LowVolt RotLimit
←
←
←
←
←
/
*1 FWD: Moving forward; REV: Moving in reverse
*2 Const: At constant speed (only when running); Blank: Stopped
*3 VF: V/F controlled
1/6: Operational guide page number
Set frequency
Output frequency (before slip compensation)
Output frequency (temporary frequency)
Output current
Output voltage
Calculated torque
Motor rotational speed
Load rotational speed
Running direction, output condition
*1
Deceleration condition
*2
Current limited
Selected motor Drive motor type Voltage limited
Control method
*3
Torque limited
---
Insufficient voltage Rotational direction limited
Return to previous screen Return to running mode