Fuji Electric FRENIC-AQUA series, User Manual

Page: 414 / 751

6.3 Details of Function Codes
6-133
Chap. 6
FUNCTION C
ODES
C22 to C28 Pattern Operation (Stages 1 to 7)
C22 to C28 configure stages 1 to 7, respectively, by setting the run time, motor rotation
direction and acceleration/deceleration time for each stage.
The inverter runs in the order of stages 1 to 7 (in the order of C22 to C28).
Items to be Configured
for Each Stage
Data Setting Range
Run time 0.00 to 6000.00 s
(*)
Motor rotation direction FWD: Forward direction (clockwise)
REV: Reverse direction (counterclockwise)
1: F07 (Acceleration time 1), F08 (Deceleration time 1)
2: E10 (Acceleration time 2), E11 (Deceleration time 2)
3: E12 (Acceleration time 3), E13 (Deceleration time 3)
Acceleration/deceleration time
4: E14 (Acceleration time 4), E15 (Deceleration time 4)
(*) The number of significant figures for the run time is 3. Upper three digits can be set.
Setting the run time at "0.00 s" skips the corresponding stage to the next one.
Reference frequencies to be applied in a pattern operation are multistep frequencies 1 to 7
(C05 to C11) assigned to stages 1 to 7, respectively, as listed below. Specify multistep
frequencies with C05 to C11.
Stage No. Reference frequency
Stage 1 C05 (Multistep frequency 1)
Stage 2 C06 (Multistep frequency 2)
Stage 3 C07 (Multistep frequency 3)
Stage 4 C08 (Multistep frequency 4)
Stage 5 C09 (Multistep frequency 5)
Stage 6 C10 (Multistep frequency 6)
Stage 7 C11 (Multistep frequency 7)