Fuji Electric FRENIC-AQUA series, User Manual

Page: 596 / 751

6.3 Details of Function Codes
6-315
Chap. 6
FUNCTION C
ODES
Data Selectable Signals
2008 (3008) Output of step 8 SO08
2009 (3009) Output of step 9 SO09
2010 (3010) Output of step 10 SO10
2011 (3011) Output of step 11 SO11
2012 (3012) Output of step 12 SO12
2013 (3013) Output of step 13 SO13
2014 (3014) Output of step 14 SO14
4001 (5001) Terminal [X1] input signal X1
4002 (5002) Terminal [X2] input signal X2
4003 (5003) Terminal [X3] input signal X3
4004 (5004) Terminal [X4] input signal X4
4005 (5005) Terminal [X5] input signal X5
4006 (5006) Terminal [X6] input signal X6
4007 (5007) Terminal [X7] input signal X7
4010 (5010) Terminal [FWD] input signal FWD
4011 (5011) Terminal [REV] input signal REV
6000 (7000) Final run command FL_RUN
(ON when "frequency command
≠
0" and a run command is given)
6001 (7001) Final FWD run command FL_FWD
(ON when "frequency command
≠
0" and a run forward command is given)
6002 (7002) Final REV run command FL_REV
(ON when "frequency command
≠
0" and a run reverse command is given)
6003 (7003) During acceleration DACC
(ON during acceleration)
6004 (7004) During deceleration DDEC
(ON during deceleration)
6005 (7005) Under anti-regenerative control REGA
(ON under anti-regenerative control)
6007 (7007) Alarm factor presence ALM_ACT
(ON when there is no alarm factor)
„
Time setting (U04, etc.)
U04 and other related function codes specify the general-purpose timer period or the
increment/decrement counter value.
Data Function Description
Timer period The period is specified by seconds.
0.00 to
+600.00
Counter value The specified value is multiplied by 100 times. (If 0.01 is
specified, it is converted to 1.)
-9990.00 to
-0.01
--
The timer period or counter value is regarded as 0.00. (No
timer)
+601.00 to
+9990.00
-- The timer period or counter value is regarded as 600.