Fuji Electric FRENIC-AQUA series, User Manual

Page: 577 / 751

6-296
J521
J522
J524
External PID Control 1 (Alarm output selection)
(Upper level alarm (AH))
(Lower level alarm (AL))
J621 (External PID Control 2 (Alarm output selection))
J622 (External PID Control 2 (Upper level alarm (AH))
J624 (External PID Control 2 (Lower level alarm (AL))
J671 (External PID Control 3 (Alarm output selection))
J672 (External PID Control 3 (Upper level alarm (AH))
J674 (External PID Control 3 (Lower level alarm (AL))
J521/J522/J524, J621/J622/J624, J671/J672/J674 define two types of alarm signals
(absolute-value and deviation alarms) that the inverter can output for external PID control 1,
2 or 3, respectively.
To use the alarm output, it is necessary to assign
EPV1-ALM , EPV2-ALM or EPV3-ALM to
any of digital output terminals as duty control output with any of E20 to E24 and E27. To
generate a light alarm, the following digital output signals can be extracted without setting the
light alarm selection 4 (H184). For details of light alarms, see the description of function
codes H181 to H184.
- External PID control 1: EPV1-ALM (E20 to E24 and E27, data = 214)
- External PID control 2: EPV2-ALM (E20 to E24 and E27, data = 224)
- External PID control 3: EPV3-ALM (E20 to E24 and E27, data = 234)
J521/J621/J671 specifies the alarm output types. J522/J622/J672 and J524/J624/J674 specify
the upper and lower limits for alarms, respectively.
„ PID control 1 to 3 (Alarm output selection) (J521, J621, J671)
J521/J621/J671 specifies one of the following alarms available.
Data for
J521/J621/J671
Alarm Description
0 Absolute-value alarm
(PV)
While PV < AL or AH < PV, EPV1-ALM is ON.
1 Absolute-value alarm
(PV) (with Hold)
Same as above (with Hold)
2 Absolute-value alarm
(PV) (with Latch)
Same as above (with Latch)
3 Absolute-value alarm
(PV) (with Hold and
Latch)
Same as above (with Hold and Latch)
4 Deviation alarm (PV) While PV < SV - AL or SV + AH < PV,
EPV1-ALM is ON.