Fuji Electric FRENIC-AQUA series, User Manual

Page: 37 / 751

2-2
Three-phase 400 V class series (45 to 220 kW)
Item Specifications
FRN***AQ1
„
-4A 45 55 75 90 110 132 160 200 220
FRN***AQ1
„
-4E 45 55 75 90 110 132 160 200 220 Type
FRN***AQ1
„
-4C 45 55 75 90 110 132 160 200 220
Nominal applied motor
(Output rating) (kW)
*
1
45 55 75 90 110 132 160 200 220
Rated capacity (kVA) *
2
69 85 114 134 160 192 231 287 316
Rated capacity (kW) 45 55 75 90 110 132 160 200 220
Rated voltage (V) *
3
Three-phase 380 to 480 V (with AVR function)
Rated current (A) *
4
91 112 150 176 210 253 304 377 415
Overload capability 110%-1 min (Overload tolerated interval: compliant with IEC/EN 61800-2)
Output r
atings
Rated frequency (Hz) 50, 60 Hz
Main power supply
(No. of phases, voltage,
frequency)
Three-phase 380 to 440 V, 50 Hz
Three-phase 380 to 480 V, 60 Hz
Control power supply
auxiliary input
(No. of phases, voltage,
frequency)
Single-phase 380 to 480 V, 50/60 Hz
Auxiliary main circuit power
supply
*
5
(No. of phases, voltage,
frequency)
Single-phase, 380 to 440 V, 50 Hz
Single-phase, 380 to 480 V, 60 Hz
Allowable voltage/frequency Voltage: +10 to -15% (Interphase voltage unbalance: 2% or less) *
6
, Frequency: +5 to -5%
Rated input current (A) *
7
83.1 102 136 162 201 238 286 357 390
Input power
Required capacity (kVA) 58 71 95 113 140 165 199 248 271
Braking torque (%) *
8
10 to 15
Br
aking
DC braking Braking starting frequency: 0.0 to 60.0 Hz, Braking time: 0.0 to 30.0 s, Braking level: 0 to 60%
EMC filter
(IEC/EN 61800-3: 2004) Compliant with EMC standard: Emission
Category C2, Immunity 2nd Env. Compliant with EMC standard: Emission Category C3,
Immunity 2nd Env.
DC reactor (DCR) Built-in Bundled as standard
Fundamental
wave PF
> 0.98
Power factor
(at rated load)
Total PF
≥
0.90
Efficiency (at rated load) (%) 97 97 97 97 97 97 98 98 98
Applicable safety standards UL508C, C22.2 No. 14 (Under application), IEC/EN 61800-5-1: 2007
Enclosure (IEC/EN 60529) IP21/IP55 IP00
Cooling method Fan cooling
IP21 50 50 70 70 - - - - -
IP55 50 50 70 70 - - - - -
Weight / Mass
(kg)
IP00 - - - - 62 64 94 98 129
*1 Fuji 4-pole standard motor
*2 Rated capacity is calculated assuming the rated output voltage as 440 V.
*3 Output voltage cannot exceed the power supply voltage.
*4 To run the inverter at the carrier frequency of 4 kHz or above (5 kHz or above for inverters of 110 kW or above), current derating is
required.
*5 This feeds AC power to the internal circuit when the inverter is powered with DC power, e.g., high power factor PWM converter with
power regenerative function. (Usually, this is not used.)
*6
If this value is 2 to 3%, use an optional AC reactor (ACR).
*7 Rated input current to apply when the inverter is connected to the power supply of 400 V, 50 Hz, Rsce = 120.
*8 Average braking torque for the motor running alone. (It varies with the efficiency of the motor.)
Note: The box ( „ ) replaces an alphabetic letter depending on the enclosure. M (IP21), L (IP55) or S (IP00)