Fuji Electric FRENIC-AQUA series, User Manual

Page: 249 / 751

5-70
Table 5.17 "Alarm History" Display Items (continued)
Operational
Guide Page
No.
Category Code Details
Frequency attained FAR Frequency attained
Frequency detection FDT Frequency detection
Run preparation RDY Run preparation
Recovering power after
momentary power
failure
IPF Recovering power after momentary power failure
Motor overload OL Motor overload
Fan operating FAN Fan operating
Retrying TRY Retrying
Heat sink overheat early
warning
OH Heat sink overheat early warning
Lifetime alarm LIFE Lifetime alarm
Overload prevention
controlled
OLP Overload prevention controlled
5/9
Current detection ID Current detection
6/9
Di
Control circuit terminal
input signal (terminal
input)
FWD, REV,
X1-X7,
EN1, EN2
ON/OFF information on control circuit’s terminal input
(Reversal on short-circuit, no reversal when open)
7/9
Di: Link
Communications port
input signal
FWD, REV,
X1-X7,
XF, XR, R ST
Input information on communication-specific function code
S06
(Reversal on 1, no reversal on 0)
8/9
Do
Output signal Y1-Y4, Y5A,
30ABC
Output signal information
Overlapping alarm 1 O.lap1
Simultaneously triggered alarm codes (No. 1)
(If no alarm, shows " --- "
9/9
Overlapping alarm 2 O.lap2
Simultaneously triggered alarm codes (No. 2)
(If no alarm, shows " --- ")
Fref
0.00
Hz
STOP
Iout 0.00A
PWR 0.03kW
1. Press the key while the running mode
screen is displayed.
↓
PRG
0.Quick Setup
1.Start-up
2.Function Code
3.INV Info
4.Alarm Info
5.User Config
2. Use the / keys to select [4. Alarm Info],
and confirm with the key.
↓
/
Return to previous screen Return to running mode