Fuji Electric FRENIC-AQUA series, User Manual

Page: 623 / 751

6-342
T51 to T70 Timer Operation (Pause date 1) to (Pause date 20)
These function codes specify a maximum of 20 pause dates per year for preventing the
inverter exceptionally from running, e.g., on holidays even if timer operation is enabled. On
pause dates specified, no timer operation is performed even during timer operation period.
It is also possible to enable or disable each pause date setting.
The following two choices of pause date settings are available.
- Setting the month and day (e.g., January 1)
- Setting the day of the week (e.g., January, 2nd Sunday)
Function
code
Item to be set Function (Setting range)
T51 to T70 Pause day (Month and day) 0 to 65535
bit 15 Mode selection
0: Disable pause date setting
1: Enable pause dates setting
bit 14 -- -
bit 13 Configuration format 0: Date, 1: Day of the week
bit 12
bit 11
bit 10
bit 9
Month • January to December
bit 8
bit 7
bit 6
bit 5
bit 4
Day or week *1
• 1st to 31st (when bit 13 = 0 (Date))
• 1st to 4th week, final week
(when bit 13 = 1 (Day of the week))
bit 3
bit 2
bit 1
bit 0
Day of the week
• Monday to Sunday
(when bit 13 = 1 (Day of the week))
*1 The content differs depending upon the setting on bit 3.
For details, refer to Chapter 5, Section 5.6.3.5 "Configuring timer operation."