Fuji Electric FRENIC-AQUA series, User Manual

Page: 355 / 751

6-74
„
Function (F31, F35)
F31 or F35 specifies what is output to analog output terminal [FM1] or [FM2], respectively.
Data for
F31, F35
[FM1] output
Function
(Monitor the following)
Meter scale
(Full scale at 100%)
0
Output frequency 1
(before slip
compensation)
Output frequency of the inverter
(Equivalent to the motor
synchronous speed)
Maximum frequency (F03)
1
Output frequency 2
(after slip
compensation)
Output frequency of the inverter Maximum frequency (F03)
2
Output current
Output current (RMS) of the inverter Twice the inverter rated
current
3
Output voltage
Output voltage (RMS) of the
inverter
500 V
4
Output torque
Motor shaft torque Twice the rated motor torque
5
Load factor
Load factor
(Equivalent to the indication of the
load meter)
Twice the rated motor load
6
Input power
Input power of the inverter
Twice the rated output of the
inverter
7
PID feedback
amount
Feedback amount under PID control 100% of the feedback amount
9
DC link bus voltage
DC link bus voltage of the inverter 1000 V
10
Universal AO
Command via communications link
( Refer to the RS-485
Communication User's Manual.)
20000 as 100%
13 Motor output Motor output (kW) Twice the rated motor output
14
Calibration (+)
Full scale output for the meter
calibration
This always outputs the
full-scale (100%).
15
PID command (SV)
Command value under PID control 100% of the feedback amount
16
PID output (MV)
Output level of the PID processor
under PID control (Frequency
command)
Maximum frequency (F03)
18
Inverter heat sink
temperature
Heat sink temperature inside the
inverter unit
200°C
20
Reference
frequency
Frequency command input to the
inverter
Maximum frequency (F03)
50
PID feedback
amount 1 (PV1)
Feedback amount under PID control 100% of the feedback amount
51
PID command 1
(SV1)
Command value 1 under PID control 100% of the feedback amount
52
PID deviation 1
(ERR1)
Deviation 1 under PID control
(SV1 - PV1) (*1)
100% of the feedback amount
53
PID final deviation
(ERR)
Final deviation under PID control
(ERR1, ERR2) (*1)
100% of the feedback amount
54
PID feedback
amount 2 (PV2)
Feedback amount 2 under PID
control
100% of the feedback amount
55
PID command 2
(SV2)
Command value 2 under PID control 100% of the feedback amount
56
PID deviation 2
(ERR2)
Deviation 2 (SV2-PV2) under PID
control (*1)
100% of the feedback amount
60
External PID
feedback amount 1
(EPID1-PV)
Feedback amount under external
PID control 1
100% of the feedback amount
61
External PID
command 1
(EPID1-SV)
Command value under external PID
control 1
100% of the feedback amount