Fuji Electric FRENIC-AQUA series, User Manual

Page: 438 / 751

6.3 Details of Function Codes
6-157
Chap. 6
FUNCTION C
ODES
Object function codes Initialize to:
J465: Auxiliary Motor (Frequency
operation level)
49.0 Hz
J466: Auxiliary Motor (Hysteresis width) 10.0 Hz
y20: RS-485 Communication 2(Protocol
selection)
50: Communications link pump control
protocol
K16: Sub Monitor 1 (Display item
selection)
50: PID command (final) in physical quantity
K17: Sub Monitor 2 (Display item
selection)
51: PID feedback amount (final) in physical
quantity
When H03 = 57 (Initialize according to application (Communications-linked inverter drive
motor floating system for slave 1))
Object function codes Initialize to:
F02: Operation Method 1: External signals (Terminal command FWD
or REV )
F07: Acceleration Time 1 3.00 s
F08: Deceleration Time 1 3.00 s
F15: Frequency Limiter (High) 50.0 Hz
F16: Frequency Limiter (Low) 25.0 Hz
F26: Motor Sound (Carrier frequency) 3 kHz
F35: Pulse Output [FM2] (Function) 2: Output current
F37: Load Selection 0: Variable torque load
H30: Communications Link Function
(Mode selection)
8: RS-485 (Port 2)/RS-485 (Port 2)
J110: PID Control 1 P (Gain) 2.500 times
J111: PID Control 1 I (Integral time) 0.2 s
J401: Pump Control Mode Selection 52: Enable (Communications-linked inverter
drive motor floating system)
J425: Motor Switching Procedure 3: Equal operating time (Switching the motor at
slow flowrate stop.)
J450: Motor Increase Judgment (Judgment
frequency)
48 Hz
J451: Motor Increase Judgment (Duration
time)
5.00 s
J452: Motor Decrease Judgment
(Judgment frequency)
30 Hz
J453: Motor Decrease Judgment (Duration
time)
1.00 s
J465: Auxiliary Motor (Frequency
operation level)
49.0 Hz
J466: Auxiliary Motor (Hysteresis width) 10.0 Hz
y20: RS-485 Communication 2(Protocol
selection)
50: Communications link pump control
protocol
K16: Sub Monitor 1 (Display item
selection)
50: PID command (final) in physical quantity
K17: Sub Monitor 2 (Display item
selection)
51: PID feedback amount (final) in physical
quantity