Fuji Electric FRENIC-AQUA series, User Manual

Page: 268 / 751

5.6 Programming Mode
5-89
Chap. 5
PR
EP
AR
A
T
IO
N AND
TEST
RUN
5.6.7.6 Communication Debug
PRG > 6(Tools) > 6(COM Debug)
Communication-specific function codes (S, M, W, W1, W2, W3, X, X1, Z) can be monitored and set.
Fref
0.00
Hz
STOP
Iout 0.00A
PWR 0.03kW
1. Press the key while the running mode
screen is displayed.
↓
PRG
1.Start-up
2.Function Code
3.INV Info
4.Alarm Info
5.User Config
6.Tools
2. Use the / keys to select [6. Tools], and
confirm with the key.
↓
/
PRG>6
1.PID Monitor
2.Multi-Op. Mon
3.CLogic Monitor
4.Resonant Avd.
5.Load Factor.
6.COM Debug
3. Use the / keys to select [6. COM
Debug], and confirm with the key.
↓
/
PRG>6>6
S:COM Command
01 +0
05 0.00Hz
06 0000
07 0000
08 20.0s
5. On the mode selection screen, use the /
keys to move the Cursor, and select the
function code that you wish to set.
Confirm with the key.
↓
/
PRG>6>6
Freq. cmd p.u.
+0
-32768~+32767
Def. 0
Store
0
7. After changing the setting, confirm with the
key.
↓
PRG>6>6
S:Command
05 0.00Hz
06 0000
07 0000
08 20.0s
09 20.0s
8. The function code following the one that has
been set is displayed.
Return to previous screen Return to running mode