Fuji Electric FRENIC-AQUA series, User Manual

Page: 427 / 751

6-146
6.3.5 H codes (High performance functions)
H03 Data Initialization
This code initializes the current function code data to the factory defaults. To change function
code H03 data, it is necessary to press
+ keys or + keys (simultaneous keying).
Data for H03 Function
0
Disable initialization
(Retain settings manually made by users.)
1 Initialize all function code data to factory defaults
2
Initialize motor 1 parameters in accordance with P02 (Rated capacity) and
P99 (Motor 1 selection)
10 Initialize real-time clock information
11 Initialize function code data except communication function codes
12 Initialize U codes (Customizable logic function codes)
51 Initialize according to application (Single pump drive)
52 Initialize according to application (Inverter drive motor fixed system for 5
motors)
53 Initialize according to application (Inverter drive motor fixed system for 8
motors)
54 Initialize according to application (Inverter drive motor floating system)
55 Initialize according to application (Inverter drive motor fl
commercial power-driven motor system)
56 Initialize according to application (Communications-linked inverter drive
motor floating system for master)
57 Initialize according to application (Communications-linked inverter drive
motor floating system for slave 1)
58 Initialize according to application (Communications-linked inverter drive
motor floating system for slave 2)
59 Initialize according to application (Compressor 2)
71 Initialize according to application (Compressor)
72 Initialize according to application (Fan)
„
Initialize all function code data to factory defaults (H03 = 1)
Initialize all function code data to the factory defaults.
„
Initialize motor 1 parameters (H03 = 2)
Set function codes as follows.
(1) Function code P99 (motor 1 selection): Selects the motor type.
(2) Function code P02 (motor 1 (capacity): Sets the motor capacity (kW).
(3) Function code H03 (data initialization): H03 = 2
⇒
Function codes to be initialized: P01, P03, P06 to P12, H46
･ Upon completion of the initialization, the H03 data reverts to "0" (factory default).
･ If function code P02 data is set to a value other than the standard nominal applied motor
rating, data initialization internally converts the specified value forcibly to the standard
nominal applied motor rating. (See Table B given on the last page in Section 6.1 "Function
Code Tables.")