Fuji Electric FRENIC-AQUA series, User Manual

Page: 308 / 751

6.2 Function Code Tables
6-27
Chap. 6
FUNCTION C
ODES
Code Name Data setting range
Change
when
running
Data
copying
Default
setting
J629 External PID Control 2
(Feedback error upper-limit)
-999.00 to 0.00 to 9990.00 *10
Auto: 105% equivalent Y Y Auto
J630 (Feedback error lower-limit) -999.00 to 0.00 to 9990.00 *10
Auto: -5% equivalent
Y Y Auto
J631 (Feedback error detection time) 0.0 to 300.0 s Y Y 0.1
J640 (Manual command) 0: Keypad ( / key)
8: Keypad ( / key) (Balanceless-bumpless)
51: External PID manual command 1(Analog input: Terminals
[12], [C1] and [V2])
51: External PID manual command 2(Analog input: Terminals
[12], [C1] and [V2])
111: Apply external PID control 1 manual command
N Y 0
J651 External PID Control 3 (Mode selection) 0: Disable
1: Enable process control (Normal operation)
2: Enable process control (Inverse operation)
11: Enable process control, interlocking with inverter running
(Normal operation)
12: Enable process control, interlocking with inverter running
(Inverse operation)
21: Enable process control by external digital signal (Normal
operation)
22: Enable process control by external digital signal (Inverse
operation)
31: Enable process control by external digital signal, interlocking
with inverter running (Normal operation)
32: Enable process control by external digital signal, interlocking
with inverter running (Inverse operation)
N Y 0
J652 External PID Control 3
(Remote command selection)
0: Keypad ( / key)
3: UP / DOWN
4: Command via communications link (Use function code S32)
51: External PID process command 1 (Analog input: Terminals
[12], [C1] and [V2])
52: External PID process command 2 (Analog input: Terminals
[12], [C1] and [V2])
53: External PID process command 3 (Analog input: Terminals
[12], [C1] and [V2])
111: Apply external PID control 1 commands
112: Apply external PID control 2 commands
N Y 0
J653 (Feedback selection) 51: External PID feedback value 1
52: External PID feedback value 2
53: External PID feedback value 3
N Y 53
J655 (Display unit) See J605. N Y 0
J656 (Maximum scale) -999.00 to 0.00 to 9990.00
N Y 100
J657 (Minimum scale) -999.00 to 0.00 to 9990.00 N Y 0.00
J660 P (Gain) 0.000 to 30.000 times
ON/OFF: ON/OFF control
Y Y 0.100
J661 I (Integral time) 0.0 to 3600.0 s
Y Y 0.0
J662 D (Differential time) 0.00 to 600.00 s
Y Y 0.00
J663 (Feedback filter) 0.0 to 900.0 s
Y Y 0.5
J664 (Anti-reset wind-up) 0.00 to 9990.00 *10
OFF: Disable
Y Y OFF
J665 (ON/OFF control hysteresis width) 0.00 to 9990.00 *10
Y Y 0.00
J666 (Proportional operation output convergent
value)
0 to 150% Y Y 0
J667 (Proportion cycle) 1 to 150 s Y Y 30
J668 (Upper limit of PID process output) -10 to +110%
Y Y 100
J669 (Lower limit of PID process output) -10 to +110% Y Y 0
J670 (Upper and lower limits) 0: Limit PID output with J618
，
J619
1: 110%, -10% of PID output with J618 exceeded or less than
J619
Y Y 0
*10 The upper and lower level values are restricted by the maximum and minimum scales.