Fuji Electric FRENIC-AQUA series, User Manual

Page: 253 / 751

5-74
5.6.6 User Config
PRG > 5(User Config)
5.6.6.1 Quick Setup
PRG > 5(User Config) > 1(Select Q.Setup)
From programming mode menu number 5, "User Config" function codes can be added to or
deleted from the Quick Setup. Target function codes can be added or deleted by selecting them.
5.6.6.2 Password
PRG > 5(User Config) > 2(Password)
Setting the password allows the setting of access to inverter function codes and to prevent data
revision.
Password functions are different, as shown below, depending on whether PW1 or PW2 are selected.
Sub-Menu No. Sub-Menu Principal Functions
4
User PW1 setting Setting that allows function codes to be accessed, but data may not
be revised.
6
User PW2 setting Setting that allows no access to function codes, and data may not be
revised.
10
*
Initialize all Removes PW1 and PW2.
*) Not shown unless either PW1 or PW2 is set.
< Set Password >
Fref
0.00
Hz
STOP
Iout 0.00A
PWR 0.03kW
1. Press the key while the running mode
screen is displayed.
↓
PRG
0.Quick Setup
1.Start-up
2.Function Code
3.INV Info
4.Alarm Info
5.User Config
2. Use the / keys to select [5. User Config],
and confirm with the key.
↓
/
Return to previous screen Return to running mode