Fuji Electric FRENIC-AQUA series, User Manual

Page: 609 / 751

6-328
„
Cancel customizable logic -- CLC (E01 to E07, data = 80)
This terminal command disables the customizable logic temporarily. Use it to run the inverter
without using the customizable logic circuit or timers for maintenance or other purposes.
CLC Function
OFF Enable customizable logic (Depends on the U00 setting)
ON Disable customizable logic
Before changing the setting of CLC , ensure safety. Turning CLC ON disables the
sequence of the customizable logic, causing a sudden motor start depending upon
the settings.
„
Clear all customizable logic timers -- CLTC (E01 to E07, data = 81)
Assigning CLTC to any of the general-purpose digital input terminals and turning it ON
resets all of the general-purpose timers and counters in the customizable logic. Use this
command when the timings between the external sequence and the internal customizable
logic do not match due to a momentary power failure or other reasons so that resetting and
restarting the system is required.
CLTC Function
OFF Ordinary operation
ON
Reset all of the general-purpose timers and counters in the customizable logic.
(To operate the timers and counters again, revert CLTC to OFF.)