-
-
-
-
S
S
A
A
V
V
E
E
B
B
A
A
S
S
E
E
1
TB6560-T4 CNC Driver Manual
1.
General introduction
Low noises and low vibration due to the using of the 16 excitation
two-phase bipolar stepping motor
d
river chip
TB6560AHQ imported from Japan. The electric circuit is well-designed. All the electric items have been
strictly checked to insure the quality.
2.
Specification
•
rated voltage: DC12-DC30V;
•
Single-chip motor driver for sinusoidal microstep control of stepping motors
•
Forward and reverse rotation
•
Selectable phase excitation modes (2, 1-2, 2W1-2 and 4W1-2)
•
High output current: IOUT = AHQ: 3.5 A (peak)
•
Thermal shutdown (TSD)
If you need 36v power please contact us.
3.
Advantages
3.1 one power only
The control parts and the driving parts share one power. Users don’t need any more power.
3.2
adjustable electric current
The out-put current can be adjusted according to user’s needs.
3.3 well-arranged ports
The X port
、
the Y port
、
the Z port and the A port are connected to one port (3.96mm), which is very convenient
for users to arrange the circuitry.
3.4 manual-control function
Users can manually control the drive board through a standard port which has 15 pins
3.5 protection of the computer
By using the isolating power(1000V DC\DC) and the optoelectronic coupler, the drive board are separated
from the computer. Such design can protect user’s computer in case the board are going abnormal.
3.6
protection of the drive board
The electric current of the drive board can be locked to 100% / 75% / 50% / 20% (up to user ’s needs) of the
normal one when no signals are received from the computer, thus the service life of the drive board is assured
with less heat.
Summary of Contents for TB6560-T4
Page 7: ...S SA AV VE EB BA AS SE E 7 Pic 3 See Pic 3 Click Config Ports and Pins Pic 4...
Page 9: ...S SA AV VE EB BA AS SE E 9 Pic 6 Choose Output Signals and then set as Pic 6 shows...
Page 11: ...S SA AV VE EB BA AS SE E 11 Please click load G code see Pic 8 and Pic 9 Pic 8...
