Fuji Electric FRENIC-AQUA series, User Manual

Page: 236 / 751

5.6 Programming Mode
5-57
Chap. 5
PR
EP
AR
A
T
IO
N AND
TEST
RUN
5.6.3.6 Initialize Data
PRG > 2(Function Code) > 6(Initialize)
This returns function code data to the values in the factory-default settings. Changing the data requires
double-key operation (the key and the key or the key and the key). The following
content settings can be made to sub-menu numbers 0 to 12.
Sub-Menu
No.
Sub-Menu Principal Functions
0 Manually set values Does not initialize.
1
Initial values (factory-default
setting values)
Initialize all function codes (initializes to factory-set values).
2 Initialize Motor 1 parameters Initialize in accordance with Motor 1 selection (P99) and motor
capacity (P02).
10 Initialize time information Initialize date and time.
PRG>1(Start-up)>2(Date/Time) set values are initialized.
11 Limited initialization
(initialization except for
communication function codes) Initialize function codes except link functions y01–y20.
12 Limited initialization
(customized logic U code
initialization) Initialize function codes except customized logic U codes.
Note: Settings can be made in the same manner for function code H03 (initialize data).