Fuji Electric FRENIC-AQUA series, User Manual

Page: 255 / 751

5-76
< Enable Password Protection >
Fref
0.00
Hz
STOP
Iout 0.00A
PWR 0.03kW
1. Press the key while the running mode
screen is displayed.
↓
PRG
0.Quick Setup
1.Start-up
2.Function Code
3.INV Info
4.Alarm Info
5.User Config
2. Use the / keys to select [5. User Config],
and confirm with the key.
↓
/
PRG>5>2
3.PW Protection
6.Set PW2
10.All Clear
3. "3. PW Protection" indicates that password
protection is off (function codes can be
revised). To turn password protection on
(function codes cannot be revised), select "3.
PW Protection" and confirm with the key.
↓
PRG>5>2>3
PW Protection is
Not work totally.
Enable protect?
OK
Cancel
4. Use the / keys to select [OK], and
confirm with the key.
↓
PRG>5>2
1.Enter PW1
6.Set PW2
10.All Clear
By selecting [OK], protection is turned on with the
set password.
If password protection is on, function code data cannot be revised. The function code data
revision screen displays
.
Return to previous screen Return to running mode