Fuji Electric FRENIC-AQUA series, User Manual

Page: 319 / 751

6-38
Code Name Data setting range
Change
when
running
Data
copying
Default
setting
K12 Main Monitor (Display when stopped) 0: Reference value
1: Output value
Y Y 0
K15 Sub Monitor (Display type) 0: Numeric values
1: Bar charts
Y Y 0
K16 Sub Monitor 1 (Display item selection) *Refer to K10 (= 13 to 83) and K11 (= 1 to 8). Y Y 13
K17 Sub Monitor 2 (Display item selection)
Y Y 19
K20 Bar Chart 1 (Display item selection) Y Y 1
K21 Bar Chart 2 (Display item selection)
Y Y 13
K22 Bar Chart 3 (Display item selection)
1: Output frequency 1(before slip compensation)
13: Output current
14: Output voltage
18: Calculated torque
19: Input power
25: Load factor
26: Motor output
Y Y 19
K29 Display Filter 0.0 to 5.0 s
Y Y 0.5
K30 Coefficient for Speed Indication 0.01 to 200.00
Y Y 30.00
K31 Display Unit for Input Watt-hour Data 0: kWh
1: MWh
Y Y 0
K32 Display Coefficient for Input Watt-hour Data OFF: Cancel or reset
0.001 to 9999.000
Y Y 0.010
K33 Long-term, Input Watt-hour Data Monitor OFF: Cancel or reset
1: Hourly
2: Daily
3: Weekly
4: Monthly
Y Y 4
K81 Date Format 0: Y/M/D (year/month/day)
1: D/M/Y (day/month/year)
2: M/D/Y (month/day/year)
3: MD, Y (Month day, year)
Y Y E/A: 1
C: 0
K82 Time Format 0: 24-hour format (Time : Minute : Second)
1: 12-hour format (Time : Minute : Second AM/PM)
2: 12-hour format (AM/PM Time : Minute : Second)
Y Y 0
K83 Daylight Saving Time (Summer time) 0: Disable
1: Enable (+ 1 hour)
2: Enable (+ 30 minutes)
Y Y 0
K84 (Start date)
Y Y 0800H
K85 (End date)
Possible to specify in the special menu.
Y Y 0800H
K91 Shortcut Key Function for in Running
Mode (Selection screen)
0: OFF (Disable)
11 to 99
Y Y OFF
K92 Shortcut Key Function for in Running
Mode (Selection screen)
0: OFF (Disable)
11 to 99
Y Y 64
Note: Alphabets in the Default setting field denote shipping destination: E (EU), A (Asia), C (China).