Eaton CROUSE-HINDS ACE10 Series, Installation & Maintenance Information

Page: 1 / 12

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IF 1619
ACE10 Variable Frequency Drive System
Installation & Maintenance Information
IF 1619 • 05/18 Copyright
©
2018, Eaton’s Crouse-Hinds Division Page 1
TABLE OF CONTENTS
1. Safety instructions
1.1 Approved applications Page 2
1.2 Electrical safety Page 2
1.3 Blower safety Page 2
1.4 Hot surfaces Page 2
1.5 Enclosure safety Page 2
2. Mechanical installation
2.1 Airflow provisions - installation drawing Page 3
2.2 Weights Page 4
2.3 Lifting Page 4
2.4 Dimensional drawings Page 5
2.5 Mounting Page 6
2.6 Shroud installation Page 6
2.7 Pre-filter installation Page 6
3. Electrical installation
3.1 Enclosure grounding - internal/external Page 6
3.2 Line feed Page 6
3.3 Load feed and shield grounding to drive Page 6
3.4 Control wire routing Page 6
3.5 Blower and signal schematic Page 7
3.6 Communication modules Page 8
4. General operation
4.1 Keypad interface Page 8
4.2 Disconnect and lockout/tagout Page 8
5. Maintenance
5.1 Drive maintenance Page 9
5.2 Cooling system maintenance Page 9
5.3 Periodic mechanical maintenance (torque verification,
pushbutton lubrication, window cleaning) Page 9
5.4 Status indication - filter maintenance Page 9
5.5 Explosive event required maintenance Page 9
6. Technical data
6.1 Technical data chart Page 10
6.2 Power loss (heat dissipation) Page 10
6.3 De-rating factors and curves (ambient temperature,
altitude, switching frequency) Page 10
7. Crouse-Hinds drive parameters
7.1 Parameter table Page 10
8. Replacement parts
8.1 Pre-filter kit Page 10
8.1.1 Pre-filter installation instructions Page 10
8.2 Sintered filter kit Page 11
8.2.1 Sintered filter installation instructions Page 11
8.3 Blower kit Page 11
8.3.1 Blower installation instructions Page 11
8.4 Pushbutton operator kit Page 12
8.4.1 Pushbutton installation instructions Page 12
Control pad
assembly
Blower
cooling intake
Manifold
Blower
VFD
Disconnect
switch
Shroud
Control pad
viewing
window
Indicating
lights
Control pad
button
assembly
Disconnect
operating
handle
Explosionproof
filter
(pre-filters
removed for
clarity)
Warning plate
Warning plate
Product
nameplate
with critical
markings
Data nameplate
including torque
information
Internal
ground External
ground
Designated space for
additional DIN rail mountable
terminals/relays
Baffle
Shrouds
Blower
fuse
block
(not
shown)