manualshive.com logo in svg

Schweitzer Engineering Laboratories SEL-421-4, Instruction Manual

Share
Download
Schweitzer Engineering Laboratories SEL-421-4 Instruction Manual Download Page 729

A.9

Date Code 20171021

Instruction Manual

SEL-421  Relay

Firmware, ICD File, and Manual Versions

SEL

BOOT

SEL

BOOT

SEL

BOOT

 is a firmware package inside the relay that handles hardware initializa-

tion and provides the functions needed to support firmware upgrades. 

Table A.4

 

lists the SEL

BOOT

 releases used with the SEL-421, their revision and a descrip-

tion of modifications. The most recent SEL

BOOT

 revision is listed first.

                    

ICD File

To find the ICD revision number in your relay, view the configVersion by using 
the serial port ID command. The configVersion is the last item displayed in the 
information returned from the ID command.

configVersion = ICD-451-R201-V0-Z310004-D20140321

The ICD revision number is after the R (e.g., 201) and the release date is after the 
D. This revision number is not related to the relay firmware revision number. The 
configVersion revision displays the ICD file version used to create the CID file 
that is loaded in the relay.

NOTE: 

The Z-number representation 

is implemented with ClassFileVersion 
004. Previous ClassFileVersions do 
not provide an informative Z-number.

The configVersion contains other useful information. The Z-number consists of 
six digits. The first three digits following the Z represent the minimum IED firm-
ware required to be used with the ICD (e.g., 310). The second three digits repre-
sent the ICD ClassFileVersion (e.g., 004). The ClassFileVersion increments when 
there is a major addition or change to the IEC 61850 implementation of the relay.

Table A.3

 lists the ICD file versions, a description of modifications, and the 

instruction manual date code that corresponds to the versions. The most recent 
version is listed first.

                    

NOTE: 

All revisions of SEL

BOOT

 

listed in this table are compatible 
with all versions of firmware available 
for this relay.

Table A.2

SEL

BOOT

 Revision History

SEL

BOOT

 Firmware Identification (BFID)

Summary of Revisions

SLBT-4XX-R209-V0-Z001002-D20150130

➤

Added support for a new main board variant.

➤

Fixed issue that could cause relay to disable (i.e., become unresponsive).

SLBT-4XX-R208-V0-Z001002-D20120220

➤

Added support for a new main board variant.

SLBT-4XX-R205-V0-Z001002-D20100128

➤

First revision used with SEL-421-4,-5.

Table A.3

ICD File Revision History (Sheet 1 of 2)

configVersion

a

Summary of Revisions

Minimum 

Relay 

Firmware

ClassFileVersion

Manual 

Date Code

ICD-421-R400-V0-Z323006-D20170731

➤

IEC 61850 Edition 2 Conformance.

➤

Updated ClassFileVersion to 006.

➤

Increased the default MMS inactivity 
timeout value to 900 seconds.

➤

Updated data set and MMS report 
names.

R323

006

20171008

ICD-421-R301-V0-Z322005-D20170315

➤

Added the ability to turn off the MMS 
inactivity timeout.

R322-V0

005

20170327

ICD-421-R300-V0-Z318005-D20150413

➤

Added support for IEC 61850 group 
switch, Simulated GOOSE, and stSeld.

R318

005

20150429

ICD-421-R203-V0-Z313005-D20150323

➤

Conformance enhancements.

R313

005

20150429

Summary of Contents for SEL-421-4















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands