Getting Started
NRP2
24
User Manual 1173.9140.02 ─ 07
Recommended first steps
Before you set up a new measurement, we recommend that you preset the
R&S
NRP2. Thus, the instrument is in a defined initial state. This prevents any previ-
ous settings from causing incorrect results. In addition, a zero calibration of the sen-
sors is required. Follow the steps in
chapter 2.3, "Preset and zeroing"
2.2 Brief introduction to the operation
The R&S
NRP2 can be operated intuitively via the hardkeys and the interactive display
with the associated softkeys. All menus and dialog boxes are in the form of windows
that can be operated in the same way. The hardkeys and softkeys allow direct and
therefore convenient access to entries and settings.
The clear-cut display shows the power measurement results of up to 4 power mea-
surements simultaneously. Results can be displayed digitally or graphically, either by
an analog meter or, depending on the measurement mode, in a trace diagram.
This section briefly describes the concept of manual operation of the power meter in
order to perform the test examples with the instrument, described later on in this chap-
ter.
For a detailed description on the controls, the screen layout and how to operate the
R&S
Using the hardkeys
●
hardkeys are always available for use.
●
according to its label, a hardkey directly activates a function.
●
if two functions are provided in one hardkey, e.g. "
↵
Menu", the context determines
the currently active function. The respective function is selected automatically by
the instrument.
See
on page 12 for information concerning assign-
ment and the respective functional description of the hardkeys.
A highlighted menu item corresponding to one of the hardkeys, indicates that the func-
tion can be started either by the softkey or the associated hardkey, as shown in the
example with "Preset".
Brief introduction to the operation
北京海洋兴业科技股份有限公司（证券代码：839145）
电话：010-62176775
网址：www.hyxyyq.com
