manualshive.com logo in svg

Rohde & Schwarz NRP2, User Manual

Share
Download
Rohde & Schwarz NRP2 User Manual Download Page 138

Instrument Functions

NRP2

135

User Manual 1173.9140.02 ─ 07

Within the measurement period, a "fence", i.e. an exclusion interval, can be set. The
fence is defined by its start time and its length.

In contrast to the numeric "T'slotAv" mode, the definition of fences in the "T'slot" mode
is not restricted to the wideband power sensors of the R&S NRP-Z8x series. Instead,
all power sensors are supported that can be operated in "Trace" mode.

Start / Length of Fence

Sets the start time and length of the fence. The start time refers to the start of the time-
slot

Remote command: 

[SENSe<[1]..4>][:POWer]:TSLot[:EXCLude]:MID:OFFSet[:TIME]

on page 277

[SENSe<[1]..4>][:POWer]:TSLot[:EXCLude]:MID:TIME

 

on page 277

4.5.8 Statistics display mode

The R&S

 

NRP-Z8x wideband power sensors allow you to statistically analyze the

envelope power as CCDF, CDF or PDF. The measurement either covers one of the
four gates or, if not synchronized with the signal, a user-selectable time interval. The
measurement is repeated until the desired number of samples is attained. You can set
the video bandwidth in the "Trace" display mode to reduce noise.

Two traces can be indicated in the same measurement window. The second trace -
either from a second sensor or from an internal AWGN (Additional White Gaussian
Noise) source - can be used as reference trace. For CCDF and CDF, the graphical dis-
play can be supplemented by a tabular indication of the statistic values.

► Select "Stat's" in the control panel opened via the Window

→

Graph

→

"Display" dialog

box ("Trace&Statistics" sensor mode).

Fig. 4-61: Statistics display mode with one trace

 

Displaying traces

北京海洋兴业科技股份有限公司（证券代码：839145）

                        电话：010-62176775

网址：www.hyxyyq.com

Summary of Contents for NRP2




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands