manualshive.com logo in svg

Rohde & Schwarz NRP2, User Manual

Share
Download
Rohde & Schwarz NRP2 User Manual Download Page 95

Instrument Functions

NRP2

92

User Manual 1173.9140.02 ─ 07

With remote control, the window is selected with suffix 

<[1]..4>

 in the 

WINDow

 key-

word. For example, command 

SENSe:WINDow2:STAT ON

 activates window 2.

4.3.3 The Windows menu

The "Windows" menu is context-sensitive and displays only those menu items that are
relevant to the current measurement scenario. The menu includes all window functions
the instrument provides.

Fig. 4-24: Windows menu

4.3.3.1

Selecting a window

The window to be configured is selected by the tab.

Window dialog box tabs

Each window is assigned a tab. All the parameters settings in the "Window" dialog box
act on the selected window.

Remote command: 

DISPlay[:WINDow]:SELect

 

on page 246

With remote command there is a distinction between selecting the active window and
selecting the window to be configured. The active window is selected using command

DISPlay:WINDows:SELect

. The window to be configured is selected with the suffix

of the 

WINDows

 keyword. For example 

DISPLay:WINDow3:NAME

 defines the label of

window 3.

4.3.3.2

Using and arranging windows

The labeling of the second softkey in the "Windows" menu is context-sensitive and
changes according to the status of the active window.

Fig. 4-25: Windows menu, softkeys for controlling the windows

 

 

 

Displaying measurement results

北京海洋兴业科技股份有限公司（证券代码：839145）

                        电话：010-62176775

网址：www.hyxyyq.com

Summary of Contents for NRP2




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands