manualshive.com logo in svg

Rohde & Schwarz NRP2, User Manual

Share
Download
Rohde & Schwarz NRP2 User Manual Download Page 59

Manual Operation

NRP2

56

User Manual 1173.9140.02 ─ 07

If you edit a value in a Filter, Range and Trigger dialog box using the cursor keys 

⇧

 

⇩

,

the new value is accepted immediately. This feature allows you to quickly assess the
effect of value change and, thus, to perform interactive adjustment of settings.

If you enter a new value with the digit/letter panel (see below), the new value has to be
confirmed before it is accepted. The symbol 

↵

 appears above the editing field to indi-

cate that the new value is not accepted until you confirm it with the 

↵

MENU hardkey.

3.5.8 Drop-down lists

Drop-down lists are used to select an item from a list of predetermined values. When
the drop-down list is activated, the list “folds out” upwards or downwards.

The up/down cursor keys, or one of the rocker switches next to the list, are used to
select items from folded out pop-up menus. Confirm the selection with the 

↵

MENU

hardkey or reject with the ESC hardkey.

3.5.9 Digit and letter panels

Panels which are displayed when an editing field is activated (see above) are used to
enter digits, letters and units.

Entering letters with the letter panel is like entering letters on a phone keypad. "Caps"
is used to select upper case for the next letter.

 

 

Dialog boxes and their controls

北京海洋兴业科技股份有限公司（证券代码：839145）

                        电话：010-62176775

网址：www.hyxyyq.com

Summary of Contents for NRP2




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands