manualshive.com logo in svg

Rohde & Schwarz NRP2, User Manual

Share
Download
Rohde & Schwarz NRP2 User Manual Download Page 53

Manual Operation

NRP2

50

User Manual 1173.9140.02 ─ 07

The R&S

 

NRP2 displays results in windows. A maximum of four windows can be dis-

played simultaneously on the screen. They are numbered 1 to 4. Windows have a title
bar which contains the number (fixed) and, optionally, the window name (user-defina-
ble).

Windows do not have any control elements.

Menu bar

Fig. 3-2: Screen layout / menu bar

A menu bar is always displayed at the top of the screen. It contains the menu names.
The active menu is highlighted.

Selecting the active menu

Fig. 3-3: Screen layout / selecting the active menu

Select the active menu:

► Press the right or left side of the topmost softkey one or more times. Alternatively

you can also use the cursor keys 

⇦

 

⇨

.

Folding menus out or in

Fig. 3-4: Screen layout / measurement menu folded out

Fold out/in the active menu:

1. Press the 

↵

 MENU hardkey to fold the menu out.

2. Press the 

↵

 MENU hardkey again to fold the menu in.

The menu also folds out automatically if another menu is selected.

Screen layout

北京海洋兴业科技股份有限公司（证券代码：839145）

                        电话：010-62176775

网址：www.hyxyyq.com

Summary of Contents for NRP2




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands