manualshive.com logo in svg

Rohde & Schwarz NRP2, User Manual

Share
Download
Rohde & Schwarz NRP2 User Manual Download Page 103

Instrument Functions

NRP2

100

User Manual 1173.9140.02 ─ 07

Fig. 4-30: List of functions

Impedance measurements "SWR", "RCoeff" and "RLoss"

If you work with the functions for the impedance measurement, i.e. "SWR", "RCoeff"
and "RLoss", note that the incident power must be measured in the primary channel
and the reflected power in the secondary channel.

Continuous Average and Burst Average power measurements

If Continuous Average and Burst Average power measurements have been selected
for the channels that are used as arguments for the measurement function of the
"Function & Unit" dialog box, no additional settings are required to define the measur-
and. Setting the unit and defining auxiliaries doesn't affect the measurement itself but
tailors the measurement result in such a way that it is convenient for the user.

"Trace & Statistics" mode and "Graph" results window

If the primary channel is operating in the "Trace & Statistics" mode and the results win-
dow is set to "Graph", the envelope power of this channel is automatically shown as a
function of time or in its distribution and distribution density function ("CCDF", "CDF",
"PDF"). In this case, it is not possible to select another measurement function.

Function

The list of functions itemizes all the measurement functions provided by the
R&S

 

NRP2.

Any of the four channels can be assigned primary or secondary channel.

The available units depend on the selected function, see tables 

4-3

, 

4-4

, 

4-5, 108

.

For example, in trace mode, only "Single (A)" and "Ratio (A/B)" are available, and in
statistics mode only one channel is available, which corresponds to "Single (A)".

"Single (A)"

Power in the primary channel

"Ratio (A/B)"

Ratio of the power in the primary channel to the power in the secon-
dary channel.

"SWR (A,B)"

Standing wave ratio.

"RCoeff (A,B)"

Reflection coefficient.

"RLoss (A,B)"

Return loss.

"Diff (A-B)"

Power difference between the primary and secondary channel.

"Sum (A+B)"

Sum of power in primary and secondary channel.

Configuring measurements

北京海洋兴业科技股份有限公司（证券代码：839145）

                        电话：010-62176775

网址：www.hyxyyq.com

Summary of Contents for NRP2




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands