manualshive.com logo in svg

Rohde & Schwarz NRP2, User Manual

Share
Download
Rohde & Schwarz NRP2 User Manual Download Page 56

Manual Operation

NRP2

53

User Manual 1173.9140.02 ─ 07

3.4 Menu handling

The menus can contain up to eight menu items which are used to perform an action,
open a dialog box or set a parameter.

Perform an action

If the menu contains only one or two descriptive terms, an action is performed directly.

Use a hardkey to perform an action

If the name of the action to be performed is shown in a wide orange field, you can start
the action by pressing the hardkey of the same name, e.g. (PRE)SET in this case.

Open a dialog box

If a menu item is followed by three dots “…”, it can be used to open a dialog box to set
a variety of parameters.

Set parameters

Parameter setting options are provided in the menu. The currently selected option is
highlighted in orange. Select the option by pressing the left or right side of the associ-
ated rocker switch.

Use of softkeys with dual assignments

Some softkeys are assigned two menu items. One is selected by pressing the left-hand
side of the rocker switch, the other, the right-hand side.

The two menu items are separated by a vertical line.

3.5 Dialog boxes and their controls

Dialog boxes contain check boxes, option fields, editing fields and drop-down lists as
control elements. They are activated using the appropriate rocker switch to their right.
If two control elements are positioned side by side, the element on the left is operated
with the left-hand side of the rocker switch and the element on the right with the right-
hand side of the rocker switch.

 

 

Menu handling

北京海洋兴业科技股份有限公司（证券代码：839145）

                        电话：010-62176775

网址：www.hyxyyq.com

Summary of Contents for NRP2




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands