manualshive.com logo in svg

Rohde & Schwarz NRP2, User Manual

Share
Download
Rohde & Schwarz NRP2 User Manual Download Page 99

Instrument Functions

NRP2

96

User Manual 1173.9140.02 ─ 07

In the hybrid 

digital & analog

 mode, the resolution of the digital display (

"Setting

the resolution"

 

on page 96) and the scaling for the analog meter are adjustable

(

"Setting the Analog Meter"

 

on page 96).

●

"Graph"
In the graphical representation, all further settings are provided in the correspond-
ing diagrams. Once the window has been expanded, as described in 

"Expand"

on page 93, additional submenus provide trigger, marker or scale-setting parame-
ters.

Setting the resolution

The resolution of a digital measurement result display can be set in 4 stages, designa-
ted as 1

 

dB, 0.1

 

dB, 0.01

 

dB and 0.001

 

dB. If dB, dBm or dB

μ

V is selected as the unit,

the number of places after the decimal point is set directly. In the linear mode (W, 

Δ

%,

1), the number of digits after the decimal point depends on the selected resolution and
the magnitude of the result. A digit is added or removed for each resolution stage that
is added or removed.

The selected resolution also influences the automatic selection of the averaging num-
ber in the "Normal" mode (see 

chapter 4.2.3, "Filter / averaging"

, 

on page 79). The

higher the selected resolution, the higher the averaging number to correspond to the
number of digits.

Resolution (dB)

Sets the resolution for the measurement result display.

The resolution of the displayed result corresponds to the selected setting.

Remote command: 

DISPlay[:WINDow]<[1]..4>:RESolution

 

on page 245

Setting the Analog Meter

The analog scale in the hybrid 

digital & analog

 display mode ("D&A") is set in the

"Meter Scaling" dialog box. The dialog box opens after pressing the "Analog Meter"
softkey.

Fig. 4-27: Meter Scaling dialog box

Auto Once

Automatically selects the appropriate scaling so that the currently measured value is in
the middle of the scale.

Remote command: 

DISPlay[:WINDow]<[1]..4>:METer:AUTO

 

on page 243

Displaying measurement results

北京海洋兴业科技股份有限公司（证券代码：839145）

                        电话：010-62176775

网址：www.hyxyyq.com

Summary of Contents for NRP2




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands