manualshive.com logo in svg

Rohde & Schwarz NRP2, User Manual

Share
Download
Rohde & Schwarz NRP2 User Manual Download Page 114

Instrument Functions

NRP2

111

User Manual 1173.9140.02 ─ 07

4.4.4.1

Relative

The "Relative" settings activate or deactivate relative power measurement, or assign a
measurement result as reference.

Off On Reset

Relates a power or a power ratio to a reference value.

"Off"

Absolute power measurement or measurement of the power ratio of
two measurement channels using the "Ratio" function is performed.

"On"

Relative power measurement or relative power ratio measurement.

"Reset"

Assigns the current measurement result as reference value.

Remote command: 

CALCulate<[1]..8>:RELative:STATe

 

on page 234

CALCulate<[1]..8>:RELative[:MAGNitude]:AUTO

 

on page 233

4.4.4.2

Setting the reference value manually

The reference value can be directly entered or edited using the "Reference Value" dia-
log box. Open the dialog box with the "RefVal" softkey.

Fig. 4-42: Reference value dialog box

Ref

Enter a reference value or modify a previously set value.

Remote command: 

CALCulate<[1]..8>:RELative[:MAGNitude]

 

on page 233

Reset

The current measurement result is transferred to the reference value memory of the
active window and is displayed. This function can also be started from the "Measure-
ment" menu by using the "Reset" softkey.

Remote command: 

CALCulate<[1]..8>:RELative[:MAGNitude]:AUTO

 

on page 233

4.4.5 Limit Monitoring

An upper and a lower limit for each window with digital ("Dig") or digital/analog ("D&A")
result display can be set in the "Limits" dialog box. If either limit is violated, a warning is
issued.

The warning may be one of the following:

●

The "LIMIT FAIL" message is displayed on the screen (always).

 

 

 

Configuring measurements

北京海洋兴业科技股份有限公司（证券代码：839145）

                        电话：010-62176775

网址：www.hyxyyq.com

Summary of Contents for NRP2




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands