Remote Control - Commands
NRP2
252
User Manual 1173.9140.02 ─ 07
Return values:
<names>
Usage:
Query only
MEMory:STATe:DEFine
<string>, 1...19
MEMory:STATe:MAP
<string>
The value 0 to 19 are assigned to the memory locations of the device states, where the
memory location with the number 0 is the factory-set state and cannot be changed.
Names (
<string>
) can be assigned to these numbers with
MEMory:STATe:DEFine
or
MEMory:STATe:MAP
(except for the factory-set state).
The command
MEMory:CLEar[:NAME]
expects parameters that are actually strings
rather than the numbers of the memory locations. The default names of these memory
locations are "Setup 0" to "Setup 19". The name may contain the characters A to Z, a
to z, 0 to 9 and "_".
The query of this command returns the number of the memory location with the name
of <string>.
Parameters:
<string>, 1...19
maps the string on the selected memory location of the device
states
MEMory:STATe:RESet?
The command resets the names of the stored device states to factory default ("Setup
1" etc.).
Usage:
Query only
MEMory:TABLe:DATA?
<f_n> {, <o_n>}
The command returns the content of the currently selected offset table. The answer
consists of an alternating comma separated list of frequencies (f_n, Hz) and offsets
(o_n, dB).
Return values:
<f_n> {, <o_n>}
The answer consists of an alternating comma separated list of
frequencies (f_n) and offsets (o_n).
*RST:
Tables are not changed in case of a *RST.
Example:
MEM:TABL:FREQ 50MHz,100MHz
MEM:TABL:GAIN 1,1.1
MEM:TABL:DATA?
returned values:
5.07,1.000000,1.08,1.100000
Usage:
Query only
MEMory
北京海洋兴业科技股份有限公司（证券代码：839145）
电话：010-62176775
网址：www.hyxyyq.com
