Rohde & Schwarz NRP2, User Manual

Page: 16 / 419

Putting into Operation
NRP2
12 User Manual 1173.9140.02 ─ 07
Numerical measuring windows indicate the readings digitally, or provide the values in
form of an analog meter. A maximum of four windows can be displayed on the screen,
while their size is determined by the number of windows. The R&S
NRP2 indicates
either all windows simultaneously, or individually expanded.
For detailed information concerning the screen layout see chapter 3.2, "Screen layout" ,
on page 49.
1.5.2 Keys
The keys on the front panel of the meter are used to manually operate the instrument.
Grouped by soft- and hardkeys, each group represents specific functions.
Softkeys Hardkeys, Cursor keys and On/Standby key
1.5.2.1 Softkeys
The six softkeys are rocker switches - in other words, they can be “rocked” backwards
and forwards by pressing on the right or left side of the key. The softkey function is
context-sensitive and is indicated by screen labeling.
For more information on the softkeys see also chapter 2.2, "Brief introduction to the
operation" , on page 24, chapter 3.5, "Dialog boxes and their controls" , on page 53
and chapter 3.4, "Menu handling" , on page 53.
1.5.2.2 Hardkeys
Hardkeys cause the R&S NRP2 to return to a definite instrument state, provide access
to the main settings and activate functions. Hardkeys are always available for use.
For further information on using the hardkeys see also chapter 2.2, "Brief introduction
to the operation" , on page 24, and especially on the setup keys (PRE)SET, FREQ
and ZERO see chapter 4.1, "Main Settings" , on page 61.
↵
MENU
●
as the "
↵
" key (i.e. Enter key), it is used to confirm entries in text fields and dialog
boxes and to confirm selections in the drop-down lists.
Front panel tour
北京海洋兴业科技股份有限公司（证券代码：839145） 电话：010-62176775 网址：www.hyxyyq.com