![background image](http://html1.mh-extra.com/html/omron/r88d-kn-series/r88d-kn-series_user-manual_742799545.webp)
A-145
Appendicies
G5 Series AC Servo Drives With Built-in EtherCAT Communications, Linear Motor Type
A
-3 Sysm
ac Err
o
r Sta
tus
Cod
es
App
A-3
-2 Error D
escr
iption
Event name
Immediate Stop Input Error
Event code
64E20000 hex
Meaning
An Immediate Stop (STOP) signal was input.
Source
EtherCAT Master Function Module
Source details
Slave
Detection
timing
Continuously
Error attributes
Level
Minor fault
Recovery
Error reset (after
resetting slave
errors)
Log category
System
Effects
User program
Continues.
Operation
Power drive circuit is OFF for relevant slave.
Indicators
EtherNet/IP NET RUN
EtherNet/IP NET ERR
EtherNet/IP LINK/ACT
---
---
---
System-defined
variables
Variable
Data type
Name
None
---
---
Cause and
correction
Assumed cause
Remedy
Prevention
An Immediate Stop (STOP) signal
was input.
Clear the cause of the immediate stop
input (STOP).
The goal is to detect the error. (A
preventative measure is not required.)
Incorrect wiring of the immediate stop
input (STOP).
Correct the wiring of the immediate
stop input (STOP) if it is incorrect.
Make sure that the immediate stop
input (STOP) wiring is incorrect.
Attached
information
None
Precautions/
Remarks
“
87
”
is displayed on the Servo Drive front panel and F087 is given as the AlarmCode (4001 hex).