![background image](http://html1.mh-extra.com/html/omron/r88d-kn-series/r88d-kn-series_user-manual_742799512.webp)
Appendicies
A-112
G5 Series AC Servo Drives With Built-in EtherCAT Communications, Linear Motor Type
Event name
Regeneration Tr Error
Event code
04AE0000 hex
Meaning
The Servo Drive regeneration drive Tr is faulty.
Source
EtherCAT Master Function Module
Source details
Slave
Detection
timing
While power is
supplied to motor
Error attributes
Level
Minor fault
Recovery
Error reset (after
cycling slave
power)
Log category
System
Effects
User program
Continues.
Operation
Power drive circuit is OFF for relevant slave.
Indicators
EtherNet/IP NET RUN
EtherNet/IP NET ERR
EtherNet/IP LINK/ACT
---
---
---
System-defined
variables
Variable
Data type
Name
None
---
---
Cause and
correction
Assumed cause
Remedy
Prevention
The Servo Drive regeneration drive Tr
is faulty.
Replace the Servo Drive.
None
Attached
information
None
Precautions/
Remarks
“
18
”
is displayed on the Servo Drive front panel and F118 is given as the AlarmCode (4001 hex)
Event name
Node Address Setting Error
Event code
04B10000 hex
Meaning
The node address that was read from the rotary switches was not between 00 and 99.
Source
EtherCAT Master Function Module
Source details
Slave
Detection
timing
When
establishing
communications
after turning ON
power to the
slave
Error attributes
Level
Minor fault
Recovery
Error reset (after
cycling slave
power)
Log category
System
Effects
User program
Continues.
Operation
Power drive circuit is OFF for relevant slave.
Indicators
EtherNet/IP NET RUN
EtherNet/IP NET ERR
EtherNet/IP LINK/ACT
---
---
---
System-defined
variables
Variable
Data type
Name
None
---
---
Cause and
correction
Assumed cause
Remedy
Prevention
The Servo Drive failed.
Replace the Servo Drive.
None
Attached
information
None
Precautions/
Remarks
“
88
”
is displayed on the Servo Drive front panel and F088 is given as the AlarmCode (4001 hex).