19
Safety Precautions
G5 Series AC Servo Drives With Built-in EtherCAT Communications, Linear Motor Type
Installation and Wiring
Do not block the intake or exhaust openings. Do not allow foreign objects to enter the Servo
Drive.
Fire may result.
Provide the specified clearance between the Servo Drive and the inner surface of the
control panel or other equipment.
Fire or failure may result.
Use crimp terminals for wiring.
If simple twisted wires are connected directly to a terminal block, fire may result.
Provide safety measures, such as a breaker, to protect against short circuiting of external
wiring.
Fire may result.
Do not step on the Servo Drive or place heavy articles on it.
Injury may result.
Be sure to observe the mounting direction.
Failure may result.
Do not apply strong impact on the Servo Drive.
Failure may result.
Wire the cables correctly and securely.
Runaway Servomotor, injury, or failure may result.
Securely tighten the mounting screws, terminal block screws, and cable screws.
Failure may result.
Only use the power supply voltage specified in this manual.
Burn damage may result.
In locations where the power supply infrastructure is poor, make sure the rated voltage can
be supplied.
Equipment damage may result.
If the Servo Drive is used in the following locations, provide sufficient shielding measures.
•
Location subject to noise e.g., due to static electricity
•
Location subject to a strong electric or magnetic field
•
Location where exposure to radioactivity may occur
•
Location near power supply lines
Using the Servo Drive in any of these locations may result in equipment damage.
Connect an immediate stop relay in series with the brake control relay.
Injury or failure may result.
Caution