![background image](http://html1.mh-extra.com/html/omron/r88d-kn-series/r88d-kn-series_user-manual_742799154.webp)
4 System Design
4-40
G5 Series AC Servo Drives With Built-in EtherCAT Communications, Linear Motor Type
•
Select a leakage breaker for high frequencies and surge resistance.
•
When selecting leakage breakers, remember to add the leakage current from devices other than the
motor, such as devices using a switching power supply, noise filters, inverters, and so on.
To prevent malfunction due to inrush current, we recommend using a leakage breaker of 10 times the
total of all current values.
•
The leakage breaker is activated at 50% of the rated current. Select a leakage breaker with approx.
twice the capacity.
•
For details on leakage breakers selection method, refer to the manufacturer's catalog.
•
Because switching takes place inside the Servo Drives, high-frequency current leaks from the SW
elements of the Servo Drive, the armature of the motor, and the cables.
High-frequency, surge-resistant leakage breakers, because they do not detect high-frequency
current, can prevent operation with high-frequency leakage current.
When using a general leakage breaker, use 3 times the total of the leakage current given in the
following table as a reference value.
The following table shows the leakage current of each Servo Drive model.
R88D-KN15F-ECT-L
28
48
R88D-KN20F-ECT-L
32
48
R88D-KN30F-ECT-L
32
48
R88D-KN50F-ECT-L
32
48
R88D-KN75F-ECT-L
32
48
R88D-KN150F-ECT-L
32
48
Leakage Breaker
Servo Drive model
Input power supply
Leakage current
(Cable: 3 m)
Increase per 10 m
of cable
R88D-KN01L-ECT-L
Single-phase 100 V
0.39 mA
0.1 mA
R88D-KN02L-ECT-L
Single-phase 100 V
0.41 mA
R88D-KN04L-ECT-L
Single-phase 100 V
0.46 mA
0.12 mA
R88D-KN01H-ECT-L
Single-phase 200 V
0.83 mA
0.23 mA
3-phase 200 V
1.03 mA
R88D-KN02H-ECT-L
Single-phase 200 V
0.84 mA
3-phase 200 V
1.02 mA
R88D-KN04H-ECT-L
Single-phase 200 V
0.96 mA
0.3 mA
3-phase 200 V
1.27 mA
R88D-KN08H-ECT-L
Single-phase 200 V
1.01 mA
1.1 mA
3-phase 200 V
1.39 mA
R88D-KN10H-ECT-L
Single-phase 200 V
0.88 mA
0.93 mA
3-phase 200 V
1.14 mA
R88D-KN15H-ECT-L
Single-phase 200 V
0.96 mA
3-phase 200 V
1.18 mA
R88D-KN20H-ECT-L
3-phase 200 V
1.53 mA
1.23 mA
R88D-KN30H-ECT-L
3-phase 200 V
1.52 mA
R88D-KN50H-ECT-L
3-phase 200 V
1.39 mA
R88D-KN75H-ECT-L
3-phase 200 V
3.50 mA
2.07 mA
R88D-KN150H-ECT-L
3-phase 200 V
5.30 mA
1.13 mA
Servo Drive model
Inrush current [Ao-p]
Main circuit power supply
Control circuit power supply